SolidGoldFx The Stack in mint conditions with original box
Podcasts and pancakes. What do these things have in common? The Flippin' Flippersof course. Paul and Coe, hosts of the Flippin' Flippersgear podcast hit us up a while back to put together something special for the live broadcast pancake breakfast they host each year at NAMM. Given our shared affinity for syrupy sweet overdrives and big flavorful boosts the answer became deliciously clear. The Stack.
Combining a fully tweakable drive section based on our classic Zeta circuit paired up with an independent directionally selectable BC549 transistor boost The Stack is a drive that lets you have your cake and eat it too.
This is a limited production run and you will only be able to get one of these tasty treats from January 22nd-28th 2019 direct from the Flippin' Flippers.
All prices are in USD.
- KNOBS:
- More: Gives you a tasteful amount of volume on tap, enough to work with all kinds of setups.
- Butter: Adjusts the bass and treble content of the drive side.
- Syrup: Adjusts both the amount of overdrive and the amount of treble. As you roll the Gain up, more high end enters the signal path, allowing for clarity within the saturation.
- More: Governs the amount of boost engaged when in Boost mode. Be careful with this one!
- TOGGLE SWITCHES:
- Flip: This switch controls the order of both channels when they are used simultaneously. Toggling this switch puts the Boost before the Drive or vice-versa for two different stacked tones.
- Fluffy: This three-position toggle controls the level of the bass frequencies pushed by the Boost channel. When set to the left, the bass is the stock value. In the center, you'll find a bass cut, and the right position is a bass boost.
- Dense: Controls the level of the bass frequencies in the Drive channel. The corresponding switch positions are the same as the B. Tone switch above.
- Chewy: Adjusts the amount of mids present in the Drive channel. The left position is flat, center position s boosted, and the right position is scooped.
- Crispy: This three-position switch controls which type of clipping diodes are present in the drive channel. The left position selects a silicon-germanium hybrid for a bit more compression and crunch, the right position selects silicon parts for a bit more dynamics and sizzle, and the center position removes them altogether for a raw, throaty tone.
- UNDER THE HOOD:
- Gain (trimpot): Adjusts the overall gain of the drive channel, and thusly, the range of the external Gain control.
- Bias 1 and Bias 2 trimpots are not user-adjustable.
- AUXILIARY:
- Input: Instrument or other pedal goes here.
- Output: Amplifier or other pedal goes here.
- True bypass footswitches: Turns corresponding channels on and off.
- POWER:
- The Stack requires a center-negative 9VDC power adapter with at least 30mA of current (not included). Almost all power supplies meet this requirement, but check yours beforehand.
- DIMENSIONS:
- 4.67" x 3.68" x 1.18" (119mm x 94mm x 30mm)